Showing posts with label Eadon Consulting. Show all posts
Showing posts with label Eadon Consulting. Show all posts

Tuesday, August 22, 2023

News: Eadon design engineers help add twist to Royal Docks

By

Engineering design consultancy, Eadon Consulting is playing a pivotal role in the development of an impressive new pedestrian and cycle bridge at London’s Royal Victoria Dock.

The company works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and is based within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham.

Working in partnership with Buro Happold and Moxon Architects, design engineers have developed a 305 metre, step-free crossing that will serve as a crucial link, connecting the ExCel Centre and Custom House station on the north side of the dock to the expansive Silvertown development.

The bridge is part of the £5bn regeneration of a 60-acre historic site that is being revived and reimagined as a waterside destination. But the bridge is more than just a convenient way to cross the docks – it's an architectural marvel, in its own right.

The new bridge will have a sleek, elegant design that skims across the water in a 'Double S-curve' shape, providing ample space for both cyclists and pedestrians. The zig-zag design creates a breath-taking crossing experience while allowing for seating areas where people can rest and take in views across the dock.

Advertisement
A spokesperson for Eadon said: "At the heart of the bridge’s design is its distinctive ‘Double S-curve’ configuration, which not only enhances its visual appeal but also maximises the efficiency of the crossing. Additionally, the inclusion of a double bascule mechanism at the midpoint allows the middle section of the bridge to be lifted, enabling the seamless passage of large vessels through the dock without any interruptions.

"Eadon’s role is to support the mechanical and electrical design of this equipment. We have successfully completed RIBA Stage 3, delivering initial concept design drawings, and assisted in the submission of the successful Planning application. Looking ahead, we anticipate progressing to RIBA Stage 4 soon, marking the next phase of this exciting project."

Architects Moxon say the bridge will serve over 3,000 people an hour at peak times – a flow that ‘far exceeds’ the capacity of the existing footbridge.

Lendlease’s project director for Silvertown, Ed Mayes, said: "This new bridge is key to unlocking the potential of the site, transforming the connectivity across the Royal Docks.

"The stunning design of the new bridge will elevate it as a gateway to Silvertown’s exciting new piece of the city, and provide car-free access for all, establishing the Royal Docks as a pleasurable place to live, work and play."

Eadon website

Images: Moxon

Read more...

Thursday, May 14, 2020

News: Eadon develops high volume, regulation compliant PPE face shield

By

Design experts at Eadon Consulting have developed a high volume, regulatory compliant face visor to aid in the fight of Covid-19.

A rapidly expanding engineering design consultancy, Eadon Consulting, works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has moved office four times in six years within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham due to the growing nature of the business.

Using its wide variety of design skills, the project took only two weeks to go from concept, testing and hospital trials to injection moulded parts.

Called "Sheffshield," the finished product is BS EN 166 compliant and provides an effective barrier to liquid splashes and droplets. It comprises a single polypropylene headband with the option of either a full face shield or goggles style eye protection; both visor options are are easy to interchange and clean.

Advertisement

A spokesperson for Eadon Consulting said: "Having started 3D printing face shield parts we soon recognised that the this wasn't a long term solution and would not create the volume needed by the NHS and front line workers.

"To enable the volumes required we developed an injection moulded solution that complies with BS EN 166:2002, uses a UK supply chain and can be reused through chemical sterilisation. The supply chain has been set up to supply up to 10,000 units per day and hence can fulfill large orders very quickly."

Mayor of the Sheffield City Region (SCR), Dan Jarvis, recently issued a call to arms to South Yorkshire businesses, to join the national efforts to help make life-saving medical equipment during the Coronavirus pandemic.

Eadon said that it aims to establish a long term solution for the cost effective supply of PPE into the NHS and others in need of protection. "With support from the Local Enterprise Partnership, we are looking to create a sustainable business that offers employment opportunities."

Eadon Consulting website

Images: Eadon Consulting

Read more...

Wednesday, October 10, 2018

News: Eadon integral to new Bermudan bridge

By

Design experts at Eadon Consulting are working on a project to replace a key bridge in the beautiful North Atlantic Ocean territory of Bermuda.

A rapidly expanding engineering design consultancy, Eadon Consulting, works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has moved office four times in six years within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham due to the growing nature of the business.

In December 2017, Ramboll, the lead consultant, along with Knight Architects and Eadon Consulting, won the contract to deliver full design services for two ageing crossings that have connected L. F. Wade International Airport with capital city, Hamilton to the west, and the town of St. Georges to the east, for over 50 years.

Eadon Consulting's role is as the lead mechanical, electrical and hydraulic designers. Starting from a blank sheet of paper the team has worked through a feasibility options study considering both fixed and moving bridges for the two locations.

Swing Bridge, which currently joins St George's Harbour with the west of the island is a critical link for both motor vehicles and marine traffic, and will be replaced by a bascule bridge (sometimes referred to as a drawbridge) with a distinctive curved soffit, providing a 22 metre clear channel for shipping access to St George's harbour.

Advertisement

A spokesperson for Eadon Consulting, said: "The selected solution with its distinct shape and colours captures the soul of the island. After a public consultation on the 26th of September, the design has been approved and we are looking forward to moving the project through to the final detailed design and on to site.

"The stunning bascule bridge is an elongated shell structure made of steel. The bridge will rotate around two horizontal pivot bearings, located within the deck cross section. The deck is being lifted by a pair of hydraulic cylinders, located between the bearings on a bespoke pier."

Eadon's bespoke design solution has enabled the architectural impact of the concept to be maintained.

The bridge has a curvaceous and flowing appearance, defined by a small number of continuous edge curves. It will be finished in a pale grey, with soft tones of orange or pink to accentuate the forms. The mix of white and pastel colours references the distinctive palette typical of buildings throughout Bermuda.

As well as an aesthetically pleasing appearance, the curved design minimises the collection of water on the bridges, an important factor in resisting the corrosive effects of the tropical maritime climate.

Other bridges that have been supported by Eadon's team include the Lower Hatea bridge in New Zealand, the Copenhagen Swing Bridge and the Greenwich Reach Swing Bridge and Merchant Square Bridge in London.

Eadon Consulting website

Images: Ramboll / Knight Architects

Read more...

Friday, July 21, 2017

News: Innovative AMP companies tackle nuclear decommissioning

By

Rapidly expanding engineering design consultancy, Eadon Consulting has secured funding from the UK's innovation agency to develop a new system for decommissioning ageing nuclear facilities.

Eadon works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has moved office four times in six years within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham due to the growing nature of the business.

Innovate UK's "Integrated Innovation for Nuclear Decommissioning" competition is specifically aimed at unlocking the potential of specialist small engineering companies, to tackle the £85 billion challenge of decommissioning the Sellafield site. Eadon’s proposed system will enable nuclear decommissioning to be conducted faster, more safely, and at reduced cost.

Advertisement

The Nuclear Decommissioning Authority (NDA), Sellafield Ltd and Innovate UK allocated up to £3m to fund innovation projects as part of the Small Business Research Initiative (SBRI).

Eadon have formed a bespoke team to develop the "Versatile Decommissioning System", bringing together expertise from a range of engineering disciplines. Team members include offshore engineering experts: Red Engineering; scanning and data manipulation experts PES Scanning (also based on the AMP); Sellafield construction experts Westlakes Engineering; The Nuclear Advanced Manufacturing and Research Centre (also based on the AMP); and the famous ship builder and fabricator Cammell Laird.

James Hill, company director at Eadon Consulting, said: "As a small company of specialist engineers we are ideally placed to solve problems, our size allows us to innovate and quickly develop new ideas. This funding from the UK's Innovation Agency unlocks our potential, allowing us to really focus on the challenges of decommissioning nuclear facilities.

"Collaborating with other small companies means that we can tap into a wealth of knowledge and experience from lots of different industries and pick out all the most useful bits. Our immediate focus in on decommissioning the nuclear site at Sellafield, but the systems we are developing have huge potential for export all over the world."

The project is set to start in August and run for three months. Work will include developing concept designs for new equipment and exploring new techniques for planning and visualisation of decommissioning tasks. On successful completion of the first phase, Innovate UK will release additional funding to develop full working prototypes and start trialling the new system.

The Nuclear AMRC in Rotherham is already working with Sellafield Ltd to slash the cost of making future designs of waste container boxes, potentially saving hundreds of millions of pounds in decommissioning costs.

Tens of thousands of these 3 cubic metre steel boxes will be needed over the next 30 years with each one costing tens of thousands of pounds to produce using existing manufacturing techniques. The research focuses on the two most promising routes for cost reduction identified by Sellafield Ltd – optimising and automating welding of the container; and producing the lid flanges by casting instead of machining.

Eadon Consulting website
Nuclear AMRC website

Images: Sellafield Ltd / Nuclear AMRC


Read more...

Wednesday, August 24, 2016

News: Eadon's MULE does the heavy lifting

By

Design engineers from Eadon Consulting have played a key role in a £9m coastal defence scheme by designing a clever machine to lay 780 metres of concrete-stepped revetments.

Rapidly expanding engineering design consultancy, Eadon Consulting works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has moved office four times in six years within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham due to the growing nature of the business.

The experts were approached by Balfour Beatty in the autumn of 2014 to design a vehicle that could be used to transport and lay precast units weighing 14 tonnes that are used as part of a coastal defence project in Sandsend, North Yorkshire.

Worn-out coastal defences have been replaced along a 1km stretch of the A174 where it runs close to the shoreline. The road had a history of landslips and had required the County Council to undertake costly repairs over the years.

Advertisement

The mobile unit lifting equipment vehicle (MULE) carried revetment units 800 metres along a pre-built track at around 2km/h and layed them into the correct position using the machines' three adjustable legs to ensure accuracy. Each of the legs was able to vary its height and angle with the aid of hydraulic cylinders.

Working at the foot of a cliff and between a busy road and the sea, the MULE meant that contractors didn't have to use heavy lifting to move the units in to place.

The machine, which consists of a main frame on which the revetment is loaded, has a counterweight section at the back on which the hydraulic power pack and generator can be loaded, and it is moved by a separate unit attached to the frame via a specially designed coupling. The drive unit uses two hydraulic motors to drive the drive wheels sitting in the same guide channels and also has additional ballast which is required to meet the units traction requirements.
Eadon, who were the mechanical and structural designers on the project, carried out all of the calculations and the development of the concept. The project also saw engineers continue through to the detailed design and 3D model and manufacturing drawings.

A spokesperson for Eadon said: "The project presented several challenges during the process and were required to make significant changes to the mechanism and strengthening concepts to ensure the Mule functioned correctly. Environmental factors also had to be taken into account as the machine is required to work in a hostile, coastal environment. The design team also had to bear in mind that the client ultimately wanted a cost effective solution."

An opening ceremony has recently been performed for the scheme which saw 360 revetments successfully laid into place.

Eadon Consulting website

Images: Balfour Beatty


Read more...

Wednesday, June 1, 2016

News: RISE across the Sheffield city region

By

The RISE project is expanding across the whole of the Sheffield city region (SCR) having found success in connecting businesses with graduates in South Yorkshire.

Established in 2013 by Sheffield City Council, Sheffield Hallam University and University of Sheffield, it was set up in response to SME feedback around recruiting graduates, which highlighted issues such as not having a training framework for a graduate employee and assessment centre style recruitment processes to find the "right" candidate being too expensive. Graduates also had concerns around employment opportunities.

The SCR Growth Hub has become a major partner in the scheme, securing RISE until 2019 and giving thousands more forward thinking SMEs the opportunity to benefit from recruiting graduate talent. It will now be rolled out to cover all nine local authority areas in the SCR.

Advertisement

The Growth Hub acts as a gateway for businesses to access specialist support. It also commissions products that are accessible to any business regardless of location, ending the postcode lottery of support in the city region.

RISE has already seen more than 200 graduates placed into paid internships over the last three years, across more than 150 companies. The roll-out of RISE across the region means a further 250 interns will be placed over the next three years, with at least 150 of these placements becoming permanent posts. This will equate to an economic impact for the region of up to £7m.

Businesses benefiting from RISE so far have ranged from digital, engineering, manufacturing and technology to third sector, recruitment and HR. The scheme's reputation amongst local businesses is strong, with RISE alumni including Rotherham-based firms Pyronix and Eadon Consulting.

Sir Nigel Knowles, Chair of the Sheffield City Region LEP, said: "RISE is about connecting the region's network of innovative and exciting businesses to talented graduates with energy, enthusiasm and fresh ideas. The development and retention of skills are crucial to the growth of our business community. RISE will support this objective, so it really is a win-win situation for all parties and we are really pleased that it is being rolled out further across the city region."

RISE runs three times a year, with intakes in spring, summer and autumn. Businesses are being recruited now to coincide with summer graduation.

RISE website

Images: RISE

Read more...

Tuesday, October 13, 2015

News: Eadon Consulting on the up

By

Design experts at Eadon Consulting have played a key part in the roller-coaster journey to get the historic scenic railway back up and running at Dreamland in Margate.

The scenic railway was one of the oldest roller-coasters in the country until it burnt down in 2008. Now the centre piece of a wider, £18m redevelopment, the new railway, based on the same layout and design as the original, is set to re-open this week.

Rapidly expanding engineering design consultancy, Eadon Consulting works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has moved office four times in six years within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham due to the growing nature of the business.

Eadon secured the contract from specialists, WGH in Doncaster and had to come up with new mechanisms that satisfied modern safety standards and English Heritage. The wooden-tracked railway with steel rails is supported by a wooden structure, a brakeman slows the ride down at certain points on the track. It is one of only eight scenic railways in the world and has Grade II* listed status.

Eadon started its involvement with the project looking at the reconditioned drive shafts of the rope haulage mechanism which lifts the train up the various inclines on the ride. It then looked at the manufacture of bogies for two new trains, the assembly that fixes the wheels to the carriages. The bogies were to be manufactured from timber which Eadon has previous design experience of in the waterway and bridge structure sectors.

The complexities of the design soon became apparent. The original design would not meet modern safety standards and the outward appearance of the bogie could not be changed for heritage reasons. The outer space envelope available for the bogie could not change as this was already set by the rail gauge and dimensions of the main structure.

Eadon designed an internal box chassis which could utilise steel for connections and composite sections, strengthening the assembly without it affecting the outward appearance of the bogie, which would still be timber in appearance and still include connection bolts even though they were now redundant.

Piers Turnbull, design engineer at Eadon Consulting, said: "The bogie design was a fascinating job to work on with several unique aspects. It was a great opportunity to put knowledge gained on other timber structures to use on quite a unique project. Additionally, the historic nature of the job meant that implementing the design changes required for meeting the modern code were an extremely challenging and rewarding part of the project.

"I am very much looking forward to going to see it up and running."

Over the last few months Eadon Consulting has seen an influx of diverse and notable projects landing on its doorstep. From a number of international inquiries to large nuclear jobs and bridging projects in London and Europe. As a result the firm is looking to boost its team of design engineers.

Eadon has also worked with the RISE project since it launched in 2012, taking on graduates and employing some of them on a permanent basis. The graduate recruitment and internship initiative was established by Sheffield City Council, Sheffield Hallam University and University of Sheffield to connect businesses with graduates.

The eighth round of RISE is underway with potential interns undergoing assessments and interviews this month.

James Hill, director at Eadon Consulting, said: "It's always really exciting to see our plans for growth play out beyond our expectations and new and bigger projects get underway around the office. It's also great that as part of this we are able to look at further expanding our team. 2016 is looking really busy for Eadon and as such we are currently looking for talented staff to join us and get involved with our ever expanding portfolio of work."

Eadon Consulting website

Images: Dreamland

Read more...

Tuesday, May 19, 2015

News: Opportunities arise at Eadon

By

Engineering design consultancy, Eadon Consulting, continues to grow by finding the right talent and developing them through internships.

The company works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has has moved office four times in six years within the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham due to the growing nature of the business.

Operating within a very specialist field, recruitment has always been a challenge and graduate internships has been the solution for the business that needs talented, skilled people with an enthusiasm and thirst for more in-depth industry knowledge.

Now with 15 staff, Eadon has worked with the RISE project since it launched in 2012, taking four graduates and employing three on a permanent basis.

RISE is an initiative between Sheffield City Council, Sheffield Hallam University and University of Sheffield that connects businesses with graduates. It was set up in response to SME feedback around recruiting graduates, which highlighted issues such as not having a training framework for a graduate employee and assessment centre style recruitment processes to find the "right" candidate being too expensive. Graduates also had concerns around employment opportunities.

James Hill, director at Eadon Consulting (pictured, right), said: "In the past it was common for engineers to undergo some form of apprenticeship as part of their formal training. In today's world most engineers leave university having really enjoyed the academic side; in which case they often follow an employment path that allows them to specialise in calculations. Or, having developed a love of the creative aspects, they follow a design route into the workplace. We wanted an internship because this would allow us to marry these two skill sets with the more traditional in-house training of manufacturing methods and "drafting", something which we just wouldn't be able to achieve in the same way by employing a graduate without a period of mentorship.

"I honestly believe that we need schemes like RISE to secure our future. Engineering is a rapidly evolving industry but we must not lose the skill set and knowledge of our most experienced practitioners. Internships, much like apprenticeships, enable us to train the next generation of engineers so that knowledge is advanced rather than exchanged. It bridges the gap between academia and working practice."

RISE has gone from strength to strength, recruiting a further four rounds of graduates into SMEs and announcing its seventh intake to commence in June - RISE 7.

In addition to managing the recruitment and placement process, RISE provides six months on-going support and a wage subsidy of £1,000 for employers to use with their first newly appointed graduate. It is open to businesses with less than 250 employees and their own premises in Sheffield city region.

Other Rotherham firms benefiting from the RISE scheme include HBM nCode, Massarella Catering and Moorhead Savage.

Eadon Consulting website

Images: Sheffield City Council

Read more...

Thursday, October 9, 2014

News: Innovative bridge opening showcases Eadon's expertise

By

Design experts at Eadon Consulting have been instrumental in a new London bridge opening in a dramatic fanning motion similar to that of a traditional Japanese hand fan.

The expanding firm has offices in the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham. It specialises in highly complex or unusual challenges and its design work spans across a number of sectors, with expertise in mechanical, structural, control and hydraulic design.

Merchant Square Bridge is a newly constructed pedestrian crossing at Paddington Basin that recently opened to the public. Eadon first became involved in the project when they were approached to take part in a design completion in early 2012. Although there was an existing bridge in the location it did not fit with the master plan of the new development, and so working with Knight Architects and AKTII, a design was submitted as part of a design competition and was subsequently successful.

Work on the project began in the summer of 2012, and Eadon were tasked with producing the detailed mechanical design supported by exemplar electrical and hydraulic specifications. The bridge, which is one of several unique bridges along the same stretch of the Grand Union canal, consists of five separate beams. When raised each beam moves at a slightly different speed, meaning that the opening motion is similar to that of Japanese fan.

Beneath each deck is a hydraulic cylinder which is responsible for raising the 26m long fingers to between 16 and 67 degrees. Whilst the external appearance and dimensions of the cylinders are the same, the stroke of each cylinder is limited to give the splayed appearance of the decks in the raised position. To reduce the load on the hydraulic cylinders a sculptural counter weight is located above and behind each of the pivots. These form an area of interest when the bridge is down and a flat surface when in the raised position.

Richard Banks, CEO of European Land, the developer of the Merchant Square scheme, said: "Bridges are a crucial element of the built environment at Merchant Square and, therefore, it was important for the new footbridge crossing the Grand Union Canal to enhance the public realm, not only practically but visually. Knight Architects have achieved this by introducing vertical movement to the design to create a bridge that is highly visible and dramatic."

Eadon Consulting website

Images: Eadon Consulting

Read more...

Friday, March 14, 2014

News: Eadon complete global projects

By

Award-winning Rotherham engineering design consultancy, Eadon Consulting, has completed work on two new projects and been recognised for its input into another.

The expanding firm has offices in the AMP Technology Centre on the Advanced Manufacturing Park (AMP) in Rotherham. It specialises in highly complex or unusual challenges and its design work spans across a number of sectors, with expertise in mechanical, structural, control and hydraulic design. It has worked on a wide range of projects including moving bridges, water control structures such as timber and steel lock gates, analysis of high integrity nuclear cranes as well as design of bespoke machinery and lifting equipment.

Eadon Consulting were commissioned by Cullums to complete the structural analysis of an acoustic enclosure. The project consists of a stainless steel enclosure that will be used to house a gas turbine on an offshore platform in Brazil.

Cullums, who specialise in marine gas turbine applications, approached Eadon to assist in developing the design of the structure. The bespoke nature of the enclosure, which sees a cantilever incorporated at one end and an unusual structural layout, provided the project with a unique set of analysis criteria. A model was created which allowed wind and floor loading to be easily applied. Size restrictions in relation to the space the enclosure would eventually occupy also needed to be taken into account.

Working alongside Lindhurst Engineering Ltd and Zeeko Ltd, Eadon has also completed the detailed mechanical drawings for a metrology tower which is to be manufactured in India and will be installed in a new scientific facility in Dehradun in the northern part of the country.

Dehradun is located in a region of high seismic activity, this meant the four story structure had to be designed using a dynamic analysis to the Indian seismic and structural steel design codes.

Another Eadon project, The Hatea River Crossing in New Zealand (pictured), has recently won a Civic Award Trust award, recognising projects that have made a positive contribution to the local communities they serve.

Known locally as Te Matau a Pohe (the Fishhook of Pohe), the pioneering bascule bridge opened to both cars and pedestrians last year with the aim of easing traffic congestion around the city of Whangarei.

The 265 metre long bridge has a 25 metre long central lifting span to allow yachts to pass. The opening mechanism is based on a traditional rolling bascule bridge type, with the structural steel deck supports shaped to provide a distinctive elevation which speaks both of its rolling movement and also its cultural context - the curved "J" shape is an interpretation of the fish hook motif that is widely used in Maori culture.

Eadon Consulting, along with a group of specialised contractors, have been instrumental in the design of operating equipment and mechanical elements featured in the project.

Eadon Consulting website

Images: Knight Architects

Read more...

Monday, September 16, 2013

News: Graduates given a RISE at Eadon Consulting

By

Rotherham engineering design consultancy, Eadon Consulting continues to expand, taking on two new graduates.

The company works across a number of sectors, with expertise in mechanical, control, hydraulic and structural design and has has moved office four times in six years within the AMP Technology Centre on The Advanced Manufacturing Park (AMP) due to the growing nature of the business.Mark Stewart joins Eadon Consulting through RISE as a graduate design draughtsman after graduating from Sheffield Hallam University with a BSc in Product Design. A sandwich course, which gave Mark the opportunity to gain practical experience as well as academic merit, saw him receive a placement working for Reckitt Benckiser, New Technology Group.

Working for a well-known industry brand Mark's role was to study, research and analyse products produced by alternate companies and produce visual prototypes using Solidworks 3D CAD packages. This role also provided Mark with the opportunity to enhance his skill set further in areas such as concept and product development.

With plans for Mark to initially start work on rendered images for Eadon's widely recognised Lower Hatea Bridge project, he will be quickly given the chance to put his previous experience into practice.

RISE is an initiative between Sheffield City Council, Sheffield Hallam University and University of Sheffield that connects businesses with graduates. It was set up in response to SME feedback in the city around recruiting graduates, which highlighted issues such as not having a training framework for a graduate employee and assessment centre style recruitment processes to find the "right" candidate being too expensive and graduate concerns around employment opportunities.

Also starting at Eadon Consulting is Andrew Bilsborrow, a graduate engineer who recently completed a degree in Mechanical Engineering at Sheffield Hallam University. Whilst studying, Andrew completed placement work at Roll Royce as a product definition engineer. During this time he worked on several projects including the development of Trent 900 and XWB engines.

Prior to his time at university he worked as a technical sales manager for RFA Tech where he co-ordinated the manufacture and delivery of various steel reinforcements for numerous projects including the Millharbour project, Canary Wharf, London and also the BBC Media City project in Salford. Andrew has also spent time working as a production assistant for Avian Hang Gliders. He will initially be using his skills on quotations for up and coming Eadon projects.

Eadon Consulting website

Read more...

Wednesday, July 31, 2013

News: Eadon Consulting celebrate bridge opening

By

Innovative work by design engineers at Eadon Consulting in Rotherham is being showcased on the other side of the world as a new bridge opens in New Zealand.

The Hatea River Crossing, which is locally known as Te Matau a Pohe (the Fishhook of Pohe), is a pioneering bascule bridge which opened to both cars and pedestrians last month with the aim of easing traffic congestion around the city of Whangarei.

The 265 metre long bridge has a 25 metre long central lifting span to allow yachts to pass. The opening mechanism is based on a traditional rolling bascule bridge type, with the structural steel deck supports shaped to provide a distinctive elevation which speaks both of its rolling movement and also its cultural context - the curved "J" shape is an interpretation of the fish hook motif that is widely used in Maori culture.

Eadon Consulting, along with a group of specialised contractors, have been instrumental in the design of operating equipment and mechanical elements featured in the project.

Although the bridge has been fully functional for the last month, this official opening celebration, which includes a parade and flotilla, has helped showcase the bridge and generate worldwide recognition and interest.

Michael Thorogood, founder and company director at Eadon, said: "The project has allowed the complete team to showcase their combined skills in both the design and construction of the bridge and has delivered a project that the Whangarei region can be proud of."

Simon Weston, infrastructure services manager at Whangarei District Council added that "the bridge is a piece of international-quality architecture and engineering."

Based on the Advanced Manufacturing Park, Eadon staff are good at finding a solution to a highly complex or unusual challenge. Their design work spans across a number of sectors, with expertise in mechanical, structural, control and hydraulic design. They have worked on a wide range of projects including moving bridges, water control structures such as timber and steel lock gates, analysis of high integrity nuclear cranes as well as design of bespoke machinery and lifting equipment.

The firm has also recently secured the contract to design new moveable gantries for the Great Belt suspension bridge in Denmark with The Spencer Group.

The Hull-based engineering specialist has been appointed to carry out the largest retro-fitted bridge dehumidification project ever undertaken in the world. It follows on from similar projects with Eadon on the Humber Bridge and at Älvsborgsbron in Gothenburg.

The innovative "Cable Crawler" traversing system provides high-level access to main cables on suspension bridges and enables the negotiation of hand strand posts, hand wires and cable clamps without the need to return the gantry to the bridge deck. It eliminates traffic management after installation and has been designed to provide 100 per cent containment of personnel and tools.

Eadon Consulting website

Images: Knight Architects

Read more...

Wednesday, June 12, 2013

News: Eadon has designs on further expansion

By

Rotherham engineering design consultancy, Eadon Consulting, has moved office four times in six years within the AMP Technology Centre due to the growing nature of the business.


With global clients, Eadon staff are good at finding a solution to a highly complex or unusual challenge. Their design work spans across a number of sectors, with expertise in mechanical, structural, control and hydraulic design. They have worked on a wide range of projects including moving bridges, water control structures such as timber and steel lock gates, analysis of high integrity nuclear cranes as well as design of bespoke machinery and lifting equipment.

Founded in 2007 with the aim of delivering a fresh approach to engineering design and consultancy, James Hill, David Price and Michael Thorogood set out to create a client focused company that was able to provide specialist services and was dedicated to exceeding customer requirements and expectations.

The founders all spent time with Rotherham design engineers, M G Bennett and Associates, since acquired by Atkins, working on varied projects such as backup machines for some of the world's largest tunnelling machines, some of the UK's most prestigious moveable bridges, as well as special projects such as the Halley VI Antarctic Research Station.

Eadon's projects include the design of high level platforms required for servicing bridge structures, Junction Lock Swing Bridge at Bristol Docks, new flow gates on the Killaloe Canal, near Limerick, and a spectacular moving bridge at Poole Harbour in Dorset.

Eadon has already moved office four times within the AMP Technology Centre due to the growing nature of the business, with the past six months have seen four new staff join the expanding Eadon team. Their arrival brings the team up to 14 people currently and with an expanding list of exciting projects and clients to their name Eadon are constantly on the lookout for new opportunities to expand. The company aims to develop its current team to around 20 staff within the next few years.

Michael Thorogood, founder and company director at Eadon, said: "We enjoy being among likeminded technical companies here at the AMP and although we now work on many global projects being based on the Park gives Eadon excellent networking opportunities with a range of different engineering companies."

Eadon Consulting website

Images: Eadon Consulting

Read more...

Thursday, February 24, 2011

News: Eadon selected for Swedish bridge project

By

Following on from their success on the Humber Bridge, Rotherham-based design experts at Eadon Consulting have again been employed by C Spencer Limited to design gantries for the Älvsborgsbron in Gothenburg.

Eadon Consulting were the designer of the high level platforms required to carry out the majority of the works for the Humber Bridge Main Cable Dehumidification Project by C Spencer Limited. The movable gantries acted as a working platform to allow the main cables to be heat sealed in a polymer wrap along their entire length.

At just 933m long, the Älvsborgsbron is on a different scale to the Humber Bridge but presents its own particular challenges with respect to the design of the gantries.

The most noticeable difference between this and other suspension bridges is that the side spans of the bridge are viaducts so there are no hanger cables supporting the deck below and more importantly, not providing sideways support to the gantries in the case of storm winds.

Unlike other larger suspension bridges that Eadon staff have worked on, which have thousands of parallel wires making up the main cable, these cables are made of 85, 55mm diameter locked coil wires.

The projects are a pro-active move to prevent wire deterioration. Dry air is introduced into the steel cables to drive moisture out of the voids between the individual wires and reduce the level of humidity to below that which corrosion occurs. Work involves wrapping the cables with a polymeric material to form an air and water-tight sealed environment.

To make the cable section, round aluminium extrusion packs are laid around the outside of the cable which are secured by 4mm diameter wire wrapped tightly around the full length of the cable. Careful consideration has to be given to the gantry supports bearing on the cable in order not to cause damage.

Two gantry designs will be used on the Älvsborgsbron, one type on the main span and another on the side spans. The gantries are due to be installed in March 2011 with the main cable dehumidification project due to be completed before the winter.

Based on the Advanced Manufacturing Park (AMP) in Rotherham, Eadon Consulting is an engineering design consultancy working across a number of sectors, with expertise in mechanical, control, hydraulic and structural design.

Eadon Consulting website

Images: eadonconsulting.co.uk

Read more...

Wednesday, February 2, 2011

News: Eadon awarded work at Bristol's historic floating harbour

By

Rotherham-based Eadon Consulting is carrying out further design work in Bristol as part of the £11m City Docks Capital Project.

Following their work on Junction Lock Swing Bridge at Bristol Docks, Eadon have designed new Ekki timber lock gates to replace those at Netham Lock on the Feeder Canal. The Feeder Canal is the inland link between the River Avon and Bristol's famous floating harbour which dates back to 1809.


Netham Lock and the weir also form an important part of Bristol's flood defence mechanisms. It marks the end of the Feeder Canal and the lock gates ensure that extreme high spring tides that come over Netham weir do not enter the city and that flood water from the River Avon are diverted over the weir.

The gates have been designed for main contractors, BAM Nuttall and due to the more onerous rules on the use of timber, the new gates have had to be strengthened compared to the old gates.

A lack of drawings for the existing lock gates necessitated a diver survey to try and establish the correct dimensions for the new gates as accurately as possible however final sizing of the gates will take place once the old gates have been removed.

Eadon also carried out a feasibility study on the gates to establish the most economical and practical way of future mechanisation.

Based on the Advanced Manufacturing Park, Eadon Consulting has experience of designing waterway control structures, lock gates, moving bridges and other bespoke mechanical, electrical and hydraulic equipment for canal and river networks in the UK and abroad.

Eadon has recently appointed a new mechanical engineer as they look to secure further contracts in the nuclear sector. William Birdsall joins Eadon from Babcock International Group, where he was responsible for the design and supply of remotely operated equipment for inspecting nuclear reactor channel bores for the advanced gas-cooled reactor (AGR) fleet.

Will was also the Lead Engineer on a design study for dismantling the magnox nuclear reactor at Tokai Nuclear Power Station in Japan. Other major projects Will has worked on include the concept design of nuclear fuel handling machines and remote intervention machines.

Eadon Consulting website
BAM Nuttall website

Images: BAM Nuttall

Read more...

Thursday, September 23, 2010

News: Eadon expertise chosen for canal project

By

Design experts at Eadon Consulting Ltd in Rotherham have been appointed to design new flow gates on the Killaloe Canal, near Limerick, Ireland.

Eadon Consulting Ltd was listed in the tender documents by Waterways Ireland as the preferred designer for the project, having carried out some preliminary design work on the project.

The contract was awarded to L & M Keating Ltd who have appointed Eadon Consulting Ltd as the designer of the gate layout and structure.

Over the coming weeks Eadon Consulting will be designing and producing the detailed fabrication drawings for the gates and associated stop logs. The gates themselves are designed to control a canal 6m wide and 3m deep whilst operating with a head difference of 400mm.

A further outcome of the flow control gates is the incorporation of a pedestrian footbridge creating a looped walk along the canal.

The combined experience of Eadon Consulting's staff involves a number of firsts for waterways structures as well as innovative approaches to lock gate design. Whilst head design engineer at Mandall Engineering, Dave Price designed the world's first drop lock at Dalmuir.

Eadon's James Hill was involved in the design of the lock gates used at Port Dundas which involved an innovative approach to sealing of the gates as well as eliminating the use of traditional hardwood timber.

Based on the Advanced Manufacturing Park, Eadon Consulting has experience of designing waterway control structures, lock gates, moving bridges and other bespoke mechanical, electrical and hydraulic equipment for canal and river networks in the UK and abroad.

Eadon Consulting website

Read more...

Wednesday, July 7, 2010

News: New appointment at Eadon Consulting

By

Rotherham engineering design consultancy, Eadon Consulting, has announced the appointment of Ian Hylands as the company's new senior engineer.

Ian joins Eadon from Atkins, where he was an engineering consultant within its nuclear group, following three years at MG Bennett Associates.

Ian studied engineering at Cambridge University, and has extensive experience in horizontal directional drilling and structural steelwork design. Throughout his career he has also worked on a wide range of mechanical engineering projects, including work in the fields of movable structures, pressure piping design and finite element analysis.

Major projects that Ian has worked on include the design of several horizontal directional drills for gas and oil pipeline installations at the Isle of Grain, and piping analysis and design work for Sellafield nuclear plant.

Eadon's company director Michael Thorogood said: "The Eadon team are very pleased that Ian is joining us. His arrival brings additional capabilities which complement our existing skills. Ian's technical knowledge and leadership experience will assist Eadon in its aims for company growth and development."

Based on the Advanced Manufacturing Park (AMP) in Rotherham, Eadon Consulting is an engineering design consultancy working across a number of sectors, with expertise in mechanical, control, hydraulic and structural design.

Eadon Consulting website

Read more...

Tuesday, June 15, 2010

News: Eadon Consulting expands at the AMP

By

Eadon Consulting are set to take new office space at the AMP Technology Centre in Rotherham as part of their continued expansion.

Eadon Consulting are an independent mechanical and structural engineering design consultancy, who have been based at the AMP Technology Centre, on the Advanced Manufacturing Park, for the past ten months.

Due to their continuing growth, they have now expanded within the centre to larger office space, which now accommodates their existing skill set and resource with additional engineering and drafting support.

Eadon have been involved in several significant projects including the dehumidification of the Humber suspension bridge main cables and the Second Poole Harbour Crossing twin sails bascule bridge project.

James Hill of Eadon said: "Moving into the AMP Technology Centre has given us the opportunities and ability to grow in line with our current business aspirations. The support we have had from the Technology Centre staff and fellow tenants has been crucial to our success."

The AMP Technology Centre is their clients' preferred choice for hosting design and development meetings. This has enabled Eadon to invite clients to come and meet them at the Centre, saving both time and money and enabling the client to meet the wider Eadon team in a professional environment.

With their business flourishing and reputation growing, the Technology Centre not only provides an ideal location, but has also offers excellent facilities, which Eadon have been able to utilised to their advantage. Alongside the newly refurbished reception, the Technology Centre has been revamped to ensure a positive and lasting first impression to visitors.

Eadon website
AMP Technology Centre website

Images: AMP

Read more...

Tuesday, June 1, 2010

News: Poole Harbour bridge design made possible by Rotherham experts

By

Eadon, the mechanical and structural engineering design consultants based in Rotherham, has provided technical assistance for a spectacular moving bridge at Poole Harbour in Dorset.

HOCHTIEF UK has recently been successful with their tender for the construction of the Twin Sails Bridge thanks to Eadon's assistance on the procurement of the mechanical, electrical and hydraulic equipment.

By reducing traffic pressure on Poole's existing road bridge, the new second crossing is an essential component in the town's strategy for future growth.

The bridge is part of an initiative by Poole Borough Council to regenerate the area including new homes, employment opportunities and public open space that together will lever in significant investment. It will provide critical infrastructure for 26 hectares of brownfield land and unlock one of the largest regeneration sites in the South West.

The £20m bridge was designed by architects, Wilkinson Eyre and incorporates a flat deck with two hydraulically operated lifting sections that are designed to mirror the shape of racing yachts passing through the bridge.

Eadon's director and senior engineer, Michael Thorogood was also responsible for the detailed exemplar design and specification of the mechanical, electrical, control and hydraulic elements of the bridge when he worked at fellow Rotherham company, MG Bennett Associates (now Atkins Bennett).

Based on the Advanced Manufacturing Park (AMP) in Rotherham, Eadon Consulting is an engineering design consultancy working across a number of sectors, with expertise in mechanical, control, hydraulic and structural design.

Eadon Consulting website

Images: Wilkinson Eyre / eadonconsulting.co.uk

Read more...

Tuesday, February 16, 2010

News: Rotherham design engineers helping bridge get back into full swing

By

A 1920s bridge is getting back into the swing of things thanks to Rotherham engineering consultancy, Eadon Consultanting.

Last month, the Bristol Dock Junction Lock Swing Bridge swung across the Cumberland Basin in Bristol after being out of commission for approximately four months.

The highway bridge weighs 650 tonnes and dates from 1925. It is a riveted construction and has two carriageways, each with a pedestrian walkway. As part of the Bristol City Docks Operating Infrastructure Project, the operating mechanism has been upgraded. The existing system, which uses water hydraulics, is being replaced by a modern oil hydraulic system.

Based on the Advanced Manufacturing Park in Rotherham, Eadon Consulting designed the new mechanical operating equipment and bearings, working as sub-consultant for fellow Rotherham company, Atkins Bennett Ltd.

The old operating mechanism dates back to when the bridge was installed and requires frequent costly maintenance. The new system will be more robust and will mean that the operating mechanism requires less maintenance, and will therefore be more cost effective.

A unique and novel pintle design met the key challenge of dealing with the massive horizontal forces that were being applied to the central pintle support.

The pressure to move the bridge last month was recorded at 7 bar, equivalent to a force of less than 70kN, compared to the previously recorded normal force of over 200kN.

The BAM Nuttal Limited project for Bristol City Council is now nearing the final stages of completion.

Eadon Consulting website
Atkins Bennett website


Images: eadonconsulting.co.uk

Read more...
Members:
Supported by:
More news...

  © Blogger template Newspaper III by Ourblogtemplates.com 2008

Back to TOP